WiFiLink_Ruby V11.1(b286):
- WiFiLink2_Ruby_V11.1(b286)
WiFiLink2_OpenIPC_V2.9:
- Update to the official latest SDK
- HOW TO UPDATE?
The classic method
(manually copy the firmware file onto the SD card).
- (Note: Do not power off or remove the SD card
during the firmware upgrade process.)
- 1.Copy the “WiFiLink-part0.bin” and “WiFiLink-part1.bin” card flashing files to the
root directory of an empty SD card.
- 2. Insert the SD card into the camera's main board and power it on. The camera will
automatically enter upgrade mode (about 15 seconds).
- 3. Once the upgrade is complete (about 1 minute), the green light will turn off and
the SD card content will be cleared. After re-powering, a new configuration file
(“gs.key” and “user”) will be generated on the SD card.
Ruby
OpenIPC
Looking for previous versions?
